POSTED ON November 23, 2022 12:27 pm
Download ✓✓✓ DOWNLOAD (Mirror #1)
Download Software Receiver Oscar X200
Hello Jason. Thank you for your feedback. I am pleased that you are having success with your setup. I have a couple of questions for you. What is the signal strength of your X9D and the RX-XSR in relation to the aircraft?
Are you using a receiver? Did you bind the receiver to the transmitter?
There is a folder in the zip that you need to unzip. I am not sure if you do this from the X10 website. You do need to download the software for the TBS XRC. There is a link to a document on the file. If you want to see the software, look at line 461 (or 1 in my zip) in the BlueberryConfig.xml file.
I am sorry if this is all a little overwhelming to you.
The last software I sold was 21 years ago, I think that is a great age to do this. just for the heck of it, I purchased my first Arduino Uno. go commandos! it was never opened, very sad.the problem I had was that BlHeli configuration downloaded fine but no matter what I did, I could not get Betaflight to run. I took the time to experiment and finally found an easy way to make it work. the hex file had to be renamed avxy.hex and it worked. I am attaching a screenshot of my OSD. it is AMS Transmitter/Receiver board. i am running Beta 2 and ARF. I am also attaching the video of the last flight. any ideas? anyone feel free to email me at email@example.com. not all of these will be sold.
I have a 1750kv (motor) and 1600kv (Hobbywing ESC) on a 7830E. I originally had 255 amp on my ESC, and around.9 and.6 acro for the motor power. I reduced the ESC amp to 230 amps, and the motor power to around 1.2 and.7 acro. I added a new 2170B to be able to calibrate Tx. I would like to use Betaflight. I have great flight times, but when I close the throttle, the flight times drop to nothing. No radio at all, no serial monitor on my computer, I also use a homebrew ESC system. I can use the BLHeli config to load up the radio, but get no response. I can push the throttle, and the ESC will get a signal, but the flight times are dropping to the point it is almost unusable. I read the BLHeli config to be sure. I also purchased the Betaflight config for BLHeli, and there is nothing on Tx and Rx. I know that I should be running the ESCs at 100% maximum, and I am, but they are not turning on in the Betaflight config. I do not want to spend money on a new ESC/motor setup if I cant use Betaflight. your help is greatly appreciated.
Hey Oscar. I’m using a PhoenixRacing X8 80 deg. on the JW80 with your firmware. I’m using your latest beta fpv 2.0.2 With the beta fixed that’s in progress. Im using an x7 as my radio base. When I calibrate and try to pull the throttle back on my quad, there is no feedback and it just wont stop. Its very strange because I just put in a new ESC a month ago and it was working perfect. Im thinking Im getting alot of cr and it stopping the range gate. I had to pull all 5 channels off because it wouldnt stop falling. I’m sending you a pm with a video clip as well. Im almost tempted to throw my radio in the garbage but I really hope it’s just the ESC. Ill upload a video clip after I get it running fine. If its not your firmware I’m not sure how I can fix it. I was using your firmware on my previous quad. That worked perfect.
– Install GOOGLE DRIVE on the laptop computer, – Save the software to the internal hard drive then copy the software to the external hard drive, – Start the software and open the file containing the flight data, – Then select the OPTIONS file, and in the COMPACT FLASH icon. Click on the COMPACT FLASH icon in the DATA VIEWER.
Yes I saw the problem you were having I have a similar problem because I have tried to go and buy a new receiver but I dont know how to do the cut out Ive tried various ways but nothing seems to work its like I go do the cutoff and then right after the cutoff I lose the connection. My estimate is if I used an external power source the cutoff would last for a couple seconds then it would go back into the cutoff it and I get no signal and immediately lose the connection. Ive tried 2 external power sources with no luck. Is there a way to fix this?